Water Treatment Specialty Chemicals

Uses of Bleaching Powder

• Used for disinfection of drinking water. 
• Used for bleaching of washed clothes in the laundry. 
• Used for bleaching wood pulp in the paper manufacturing industry. Used as a bleaching agent in the textile industry for bleaching cotton and linen

Sodium benzoate inhibits the growth of potentially harmful bacteria, mold, and other microbes in food, thus deterring spoilage. It's particularly effective in acidic foodsIt's commonly used infoods. such as soda.bottled lemon juicepickles.jelly.salad dressing. soy sauce. and other condiments

Fluxes. Zinc Chloride is used in Dry Cell Batteries as an electrolyte and also as a moisture absorbent and corrosion inhibitor

• Ferric alum is a less pure form of aluminum sulphate. 
• It is used in lower grades of paper for loading and sizing purposes. 
• Ferric alum uses bauxite as the raw material.

Copper sulfate is used as a fungicide, algaecide, root killer, and herbicide in both agriculture and non-agricultural settings. It is also used as an antimicrobial and molluscicide. Uses for individual products containing copper sulfate vary widely.

Surati’s Boiler Antiscalant includes Powder Antiscalant, Boiler Sludge Conditioner, Sludge Remover, Boiler Water Phosphate Treatment, Phosphate Polymer Treatment, Sodium Tri poly Phosphate etc. These are all online boiler internal tubes treatment compound based on polymeric dispersants for sludge conditioning, poly-phosphates and polymers for scale and corrosion inhibition. It imparts excellent online cleanliness of boiler internals by preventing scale, metal ions and metal oxide deposits formation Surati’s Boiler Antiscalant helps to prevent deposition of calcium, iron and iron-oxide. It also aids in removal of existing scale from the water boiler. The optimum balances of products enable complete boiler online cleaning. Surati’s Boiler Antiscalant contains corrosion inhibitor which forms a protective passive film over the boiler heat transfer surface. The inhibitor prevents fouling due to Iron Hydroxides, pitting and tube failures.

Antiscalants are a family of chemicals designed to inhibit the formation and precipitation of crystallized mineral salts that form scale.

 

 

An antiscalant is a pre treatment that gets injected into the feed water that flows through the RO membrane, preventing the membrane from scaling. RO membrane scaling occurs when particles accumulate on a membrane, causing the membrane's pores to plug.

Yucca power is used for 

• osteoarthritis, 
• high blood pressure, 
• migraine headaches, 
• inflammation of the intestine (colitis), 
• high cholesterol, 
• stomach disorders, 
• diabetes, 
• and liver and gallbladder disorders.
• Arthritis.
• Digestive disorders.
• Diabetes.
• Poor blood circulation.
• Skin problems.

Description: A Descaling Agent or chemical descaler is a liquid Chemical substance used to removed limescale from metal surfaces in contact with hot water, such as in boilers, water heaters and kettles.

It should not be used on aluminium, zinc, tin, stainless steel, titanium or any other galvanized surfaces.

Hydrazine hydrate is an oxygen scavenger for water used in industrial boilers and high pressure steam generators. It is used in the production of pharmaceuticals, agricultural chemicals, and blowing agents.

• The main application of sodium chlorite is the generation of chlorine dioxide for. 
• bleaching and stripping of textiles.
• pulp.
• paper. 
• It is also used for disinfection.
• municipal water treatment plants after conversion to chlorine dioxide.

A carbon dioxide scrubber is a piece of equipment that absorbs Carbon Dioxide (CO₂). It is used to treat exhaust gases from industrial plants or from exhaled air in life support sustems such as rebreathers or in spacecraft, submersible craft

Carbon dioxide scrubbers are also used in controlled atmosphere (CA) storage.

Oxygen scavengers or oxygen absorbers are added to enclosed packaging to help remove or decrease the level of oxygen in the package.

Oxygen scavengers harness the dissolved oxygen in an inert chemical reaction to lock up the oxygen and make it unable to damage other products within the package.

PH Neutralizing Agent is a proprietary organoamine blend that raises pH and provides buffering effects to waterborne paints and coatings.

PH reducer is a swimming pool industry term describing any product that lowers the pH level when added to swimming pool water, typically a solution of muriatic acid or dry acid (sodium bisulfate).

pH Reducer is designed for soil and water applications, where the pH needs to be lowered into a more acidic range. Citric Acid solution is an organic based material that is a natural and environmentally sound management tool for lowering alkaline soil conditions.

A corrosion inhibitor is a substance applied to a metal in order to reduce its corrosion rate.

Corrosion inhibitors are chemical substances that, when added in small amounts to the environment in which a metal would corrode, will reduce, slow down or prevent corrosion of the metal.

A water softener is a unit that is used to soften water by removing the minerals that cause the water to be hard.

There are two types of water softeners, a salt-based water softener and a salt free water softener.

Salt based water softeners will give you more of the “slick” feeling in the shower and you will notice the soap creating more bubbles. Other benefits you will see include brighter colors in your clothes, reduced scale build-up on your showers and softer skin. These salt-based softeners require routine back wash and salt tank refill monthly, or depending on usage. 

 

 

Sludge Conditioner is a product to be used in situations where the boiler water is contaminated with oil. Boiler water sludge is caused by small quantities of hardness salts and traces of suspended matter present in operational steam boilers and feed waters.

Morpholine is used as an emulsifier and solubility aid for shellac, which is used as a wax for fruit coating. The European Union has forbidden the use of morpholine in fruit coating.

pH Booster has been specifically formulated with hydroxide salts of sodium and potassium in a fixed ratio in order to boost the pH during drilling and production phases. The need for this treatment is to neutralize the acid and decrease the corrosion rate of the tank lines and pumps. Boiler feed water needs to have pH of 9 - 10 in order to avoid any type of acidic attack and pH booster helps in achieving this value.

Sodium bisulfate is often used as a preservative, in meat processing, food additive, in drugs and dietary supplements. Uses of sodium bisulphate are also extended in pH control, household cleaning products, leather tanning, disinfecting, swimming pools, metal cleaning, and many other applications.

It is used for cleaning heat exchangers, boilers, condensers, descaling toilets, jackets and coils, efflorescence other deposits of mineral deposits, removing excess grout on tiles, etc. It helps remove protein deposits, hard water scale, beer and milk stone, copper corrosion, and light rust.

The Polyelectrolyte is specifically designed for improvising the filtration and clarification processes in sugar process. This organic based copolymer flocculant is effective in complex systems, which coagulate the solids and instantly form flocs. We process this product is processed with higher prudency to make it applicable with any pH value range.The products which we cater under Anionic poly Electrolyte are Anionic Polyelectrolyte Powder, Polyacralamide, PAM powder, Liquid Anionic Polyelectrolyte, Effluent Treatment Flocculant.

This while colored powder is known for its matchless characteristics like improvise efficiency of clarifier, lower retention time, suitable for any pH range, reduce mud volume and compress filter cakes. This flocculant is ideally utilized in industrial waste water treatment, drinking water treatment, paper making industry and various other industries.

Key features and benefits

• economical to use-effective at very low dosage levels.
• perform well over a wide ph range.
• improve throughput and cake solids.
• achieve high solids capture.
• easily sealable in water.
• dry product minimizes storage requirement.

application and dosage
Surati’s poly electrolyte cation is recommended for the following solid-liquid separation process:

• belt filter, centrifuge, screw press dewatering- increased production rate, cake solids and solids capture.
• water clarification - improves influent, process and effluent water quality by reducing suspended solids and turbidity.
• dissolved air flotation - result in cleaner subnatants, increased float solids and greater throughput.
• filtration - improve filtered water quality and plant throughput.

 

the above are the primary applications for this product. this product may be beneficial in any solid-liquid separation process.

Surati’s poly electrolyte cationic dry pam cationic flocculants should be properly dipersed and dissolved to 0.1-0.5% concentration. dissolution should be completed around 1 hour of agitation, but will be faster in warm water. however, the temperature of watershould be refrained from above 50⁰ c.

treatment levels (for use as )
air flotation flocculants : 0.1~ 5.0 ppm
thickening flocculants : 0.1~ 5.0 ppm
dewatering flocculants : 0.1~ 1.0 ppm